te.com/powerconnectors
2-Piece Power ConnectorsTE Connectivity
Quick Reference Guide
2-Piece Power Connectors
THINGS TO CONSIDER WHEN CHOOSING POWER CONNECTORS
Application. Does the application require a board-to-board, wire-to-board, wire-to-wire, bus bar, card edge
or a combination of these types of connectors?
Current and Voltage. Does the connector require power only, or a combination of power and signal?
How much current is required in the application? Keep in mind that power connector performance is
typically measured in amperes (or amps). The voltage is also very important as it defines the spacing
between the contacts.
Hot-Pluggability. Will the application be mated while under electrical load? If so, a hot-pluggable connector
is required. Many of the products in this guide have been approved for use in hot-plug applications.
TYPICAL POWER CONNECTOR APPLICATIONS
• AC to DC and DC to DC
• Power Supplies
• High End Computers
• Servers
• Data Storage Equipment
• Telecommunications Switches
• High Density Power Distribution
• Uninterruptible Power Supplies (UPS)
• Removable Battery Packs
• Board Stacking
• Power Distribution
te.com/powerconnectors
te.com/powerconnectors
2-Piece Power ConnectorsTE Connectivity
Application: Hot Swappable Power Supplies (500w–5KW)
CHARACTERISTICS
Connector MULTI-BEAM XLE FLATPAQ MINIPAK HDL
Current Rating Up to 75 A* 32 Amps* Up to 40 Amps*
Vented Housings
l l
Licensed —
Second source
l l
Height (mm) 12 mm 14 mm 8 mm - 9 mm
Modular
l
Active Guides
l
Customizable
l l l
MULTI-BEAM XLE Connector
• New 6 beam power contact oers up to
75 A current rating and delivers more
than 200 Amps/linear inch
• New 25A low power contact occupies
50% less pcb space than MULTI-BEAM XL
power contacts
• New slim guide sockets reduce the
overall PCB footprint
• Vented housing allows for better heat
dissipation
• Hot-plug capable
Reference Part Numbers*
6450830-2
6450850-2
FLATPAQ Connectors
• 32 Amp high-performance
CROWN BAND power contacts
• True hot-plug power contacts available
• Versatile modular design allows low
volume customized configurations to
meet your specific application
requirements
• Solder and compliant press-fit
termination options available
• Rugged design features active guide pins
Reference Part Numbers*
6646597-1
6646722-1
MINIPAK HDL Connector
• High-density, low profile, power/signal,
blind-mate connector
• Developed to meet next generation
1U application by reducing airflow
impedance
• Hot-pluggable power supplies
• Contacts rated up to 40 amps and
deliver more than 150 amps per
linear inch
Reference Part Numbers*
2-1926732-5
2-1926733-5
1926845-6
Rechargeable Batteries (for portable/hand-held electronic devices)
Battery Interconnects
• Current capacity — 7 Amps/single
contact at 30° T-Rise
• Choice of right angle or vertical mount
headers with left, right or keyless
polarization
• 5 mm pitch headers available for 7.2, 10.8
and 12.0 volts rechargeable batteries
RECHARGEABLE BATTERIES
Part Number Pitch (mm) No. of Positions Mount Style
1827684-1 2 7 Vertical Surface Mount Receptacle
1827654-1 2 7 Right Angle Thru-Hole Plug
1-1123688-7 2.5 10 Vertical Surface Mount Receptacle
6123978-1 2.5 4 Right Angle Thru-Hole Plug
120591-1 / 1 Horizontal Thru-Hole Coin Cell
5787430-1 5 / Vertical Solder Right Hand Plug
5787441-1 5 / Right Angle Solder Keyless Plug
te.com/products/multibeamxle te.com/products/minipakhdl
*Part numbers listed are examples of some available samples, please visit website for additional and mating part numbers.
* Single contact current rating
te.com/powerconnectors
2-Piece Power ConnectorsTE Connectivity
Application: Backplanes
PRODUCTS
Amps/Linear Inch Universal Power Module MULTIGIG RT ICCON MINIPAK HDE Stacked ICCON
< 125
l
125 – 175
l l
175 – 225
l
> 225
l
Universal Power Module (UPM)
Connectors (Slim UPM shown)
• Varieties of UPM include: standard,
high current, slim, low profile
• 2 performance levels
• Standard 10 amp contact
• High current 16 Amp contacts
• True hot-plug contacts
• High reliability — up to 250 cycles
• Dierent configurations include right
angle, vertical, coplanar and mezzanine
Reference Part Numbers*
1903977-1 (Slim UPM), 1645498-2
(Vertical Plug), 5646954-2 (R/A Plug)
MULTIGIG RT Connectors
• 2 mm backplane connectors
• 20 Amp contacts
• Three contact mating lengths are
available in 1.5 mm sequence levels
• 1 and 2 row versions to provide maximum
trace routing flexibility
• True hot-plug contacts
Reference Part Numbers*
1-1410271-1 (Plug)
1410270-2 (Receptacle)
ICCON Connectors
• With and without locking feature
• 35A current rating
• Slimline version available, 30% smaller
footprint
• Board-to-board, board–to-busbar, and
wire-to-board application options
• Durable, quick connect/disconnect
function for high current space
constrained applications
Reference Part Numbers*
6643274-1 (Vertical Pin),
6643228-1 (R/A Pin),
6643220-1 (SLIMLINE Socket)
MINIPAK HDE Connectors
• Designed to compliment other backplane
connectors oered by TE including
Z-PACK HM-Zd, Z-PACK TinMan and
other connectors
• Very high current density — 18 Amps
per contact, over 250 Amps/linear inch
• Two levels of contact sequencing for
mate-first-break-last operation
Reference Part Numbers*
1926226-1 (2x6), 1926229-1 (2x9)
Stacked ICCON Connector
• Very High Current Density — Up to
200 Amps per inch
• Occupies less PCB edge space than
separate ICCON power and guide
modules
• Designed to compliment Z-PACK and
other backplane connectors
• Right angle connector to mate
motherboard-to-daughterboard
power distribution systems
• Ground pin, power pin and
mate-first-break-last pin options
Reference Part Numbers*
2085181-1 (R/A Socket)
1766663-1 (Vertical Pin)
te.com/products/minipakhde
*Part numbers listed are examples of some available samples, please visit website for additional and mating part numbers.
te.com/products/iccon
te.com/products/upm te.com/products/iccon
