2/5 V V Surface Mount -- 8 Pin Memory IC -- Series 25AA320A 32 kb kb 4.4mm mm 5mA mA

In this case, the memory type of the device can be classified as Non-Volatile. Case Tube is available. An embedded 8-TSSOP (0.173, 4.40mm Width) case surrounds memory ics. It is estimated that the memory size on the chip is 32Kb 4K x 8. As with most mainstream devices, this one uses EEPROM-format memory. Due to its wide temperature range of -40°C~85°C TA, this device is well suited to a wide range of applications that require high performance. With 1.8V~5.5V as the supply voltage, it is capable of handling memory ics. It is recommended to mount it in the Surface Mount mounting type. It is planted on the chip with 8 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 2.5V to be supplied to this ic memory chip in order to operate. In order to operate effectively, the memory rotates at a clock frequency within a range of 10MHz. A device's base part number, 25AA320A, is often used in order to identify similar components. The ic memory chip comes in a package with 8 pins that allows it to be connected to a computer. The memory device has a total of 8 pins, thus indicating that it has a total of 8 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 5mA for its nominal supply current when it comes to the memory component. In terms of power requirements, this memory chip uses only 2/5 V . This part, which belongs to the -- series of memory devices, plays an important role in its target applications. It is helpful to carry data to the CPU using the SPI-type serial bus that this memory integrates with. In terms of power consumption, it can operate at a maximum supply of 0.005 mA . Nonvolatile memory arrays require 2.5 V, 3.3 V, 5 V programming voltages to change their states. Memory & Data Storage components are usually considered types of this component. A EEPROM-type memory IC is used in this chip. An 5 mA volt supply current is recommended for this deviceIt has a total of 8 terminals, which means that this device has a total of 8 terminals.