74LVC273PW,118 Overview

It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 1.65V~3.6V. The operating temperature is -40°C~125°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74LVC series. Its output frequency should not exceed 230MHz. D latch consists of 1 elements. It consumes 10μA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74LVC273 family. It is powered from a supply voltage of 1.8V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This flip flop is designed with 8 Bits. The maximal supply voltage (Vsup) reaches 3.6V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. It consumes 100nA of quiescent current without being affected by external factors.

74LVC273PW,118 Features

Tape & Reel (TR) package
74LVC series
20 pins
8 Bits

74LVC273PW,118 Applications

There are a lot of Nexperia USA Inc.
74LVC273PW,118 Flip Flops applications.

• Digital electronics systems
• Computers
• Communications
• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer