Surface Mount -- Memory IC -- Series AT24C02 2 kb kb 2.9mm mm 3mA mA
As far as its memory type goes, it falls into the Non-Volatile category. You can get memory ics in a Tape & Reel (TR) case. SOT-23-5 Thin, TSOT-23-5 case encloses it. There is 2Kb 256 x 8 of memory on the chip. The device uses a mainstream EEPROM-format memory. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of -40°C~85°C TA. There is a voltage range of 1.7V~5.5V for the supply voltage. It is recommended that the mounting type be Surface Mount. There are 5 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 2.5V volt power supply in order to operate properly. It has a clock frequency of 1MHz. When choosing similar parts, AT24C02 is frequently referred to as the device's base part number. In this ic memory chip, there is an 3-pin package that encloses the device. This memory chip has an operating supply voltage of 1.7 V to 5.5 V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 3mA. This part is part of the -- series of memory devices, which play a key role in its target applications. Memory ics must operate at a temperature of at least -40 °C. Temperatures over 85 °C°C are not recommended. Integrated into this memory is a I2C-type serial bus that facilitates data transmission to the CPU. There is a common misconception that this component is a type of Memory & Data Storage. If this part is to be used, the minimum supply voltage should not be less than 1.7 V volts. The operating voltage of the memory ics shall not exceed 5.5 V. There is an 1 MHz frequency with which this memory chip processes data. As far as the maximum frequency of this memory is concerned, it can reach as high as 1 MHz. EEPROM is the memory IC type of this chip. Devices are recommended to operate at 2 mA volts supply current. I would like to know how many terminals this device has.