2/5 V V Surface Mount -- 8 Pin Memory IC -- Series AT25160 16 kb kb 5.05mm mm 10mA mA

As far as its memory type goes, it falls into the Non-Volatile category. You can get memory ics in a Tube case. 8-SOIC (0.154, 3.90mm Width) case encloses it. There is 16Kb 2K x 8 of memory on the chip. The device uses a mainstream EEPROM-format memory. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of -40°C~85°C TA. There is a voltage range of 1.8V~5.5V for the supply voltage. It is recommended that the mounting type be Surface Mount. There are 8 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 2.5V volt power supply in order to operate properly. It has a clock frequency of 20MHz. When choosing similar parts, AT25160 is frequently referred to as the device's base part number. In this ic memory chip, there is an 8-pin package that encloses the device. It is worth noting that this memory device has 8 pins, which indicates it has 8 memory locations. This memory chip has an operating supply voltage of 5V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 10mA. As for the power supply, this memory chip only needs 2/5 V . This part is part of the -- series of memory devices, which play a key role in its target applications. Integrated into this memory is a SPI-type serial bus that facilitates data transmission to the CPU. The device is able to run from a max supply current of 0.01 mA , so it can be used in any environment. The programming voltage required for certain nonvolatile memory arrays is 1.8 → 5.5V. There is a common misconception that this component is a type of Memory & Data Storage. EEPROM is the memory IC type of this chip. Devices are recommended to operate at 10 mA volts supply current. I would like to know how many terminals this device has.