ATF2500C-20PU Overview
There are 24 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the 40-DIP (0.600, 15.24mm) package.It is programmed with 24 I/Os.There are 40 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical part is DUAL, which serves as an important access point for passengers or freight.It is powered from a supply voltage of 5V.It is packaged in the way of Tube.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.It is mounted in the way of Through Hole.It is a type of FPGA belonging to the ATF2500C(L) series.It is equipped with 40 pin count.It is also characterized by NO.According to the ATF2500, its related parts can be found.There are 2500 gates, which are devices that acts as a building block for digital circuits. The supply voltage should be maintained at 5V for high efficiency.EEPROM is adopted for storing data.This electronic part is mounted in the way of Through Hole.It is designed with 40 pins.It operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 4.5V.It operates from 5V power supplies.The frequency that can be achieved is 71MHz.The maximal frequency should be lower than 71 MHz.The operating temperature should be higher than -40 °C.The operating temperature should be lower than 85 °C.There are 13 dedicated inputs used to detect the status of input signals.This kind of FPGA is composed of EE PLD.The operating temperature should be kept below 85C.The operating temperature should be -40C at least.
ATF2500C-20PU Features
40-DIP (0.600, 15.24mm) package
24 I/Os
The operating temperature of -40°C~85°C TA
40 pin count
40 pins
5V power supplies
ATF2500C-20PU Applications
There are a lot of Microchip Technology
ATF2500C-20PU CPLDs applications.
- Power up sequencing
- Voltage level translation
- Timing control
- Interface bridging
- I/O expansion
- Discrete logic functions
- Bootloaders for FPGAs
- Address decoders
- Custom state machines
- Digital systems