BTS500601TEAAUMA2 Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the TO-252-5, DPak (4 Leads + Tab), TO-252AD package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.As you can see, it comes from the BTS50060 family.A total of 4 terminations can be found in it.During operation, the 5 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 16.5A.Surface Mount is mounted in the way of this LED driving board.In this case, there is 6.8mOhm resistance in the LED driving board.It is included in the PROFET® series.The maximum supply voltage for this lighting driver is set to 5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3.3V.

BTS500601TEAAUMA2 Features

Resistance of 6.8mOhm

BTS500601TEAAUMA2 Applications

There are a lot of Infineon Technologies
BTS500601TEAAUMA2 Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD