N-Channel PMIC PROFET® Series BTS5090 14 Pin 13.5V 14-SOIC (0.154, 3.90mm Width) Exposed Pad
It is packaged in the form of a Tape & Reel (TR).It is included with the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 2 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the BTS5090 family.A total of 14 terminations can be found in it.During operation, the 14 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 2.5A.It is possible to obtain high efficiency with a supply voltage of 13.5V.Surface Mount is mounted in the way of this LED driving board.It is included in the PROFET® series.This results in a 3.5A output current.The maximum supply voltage for this lighting driver is set to 18V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 8V.