BTS5215LAUMA1 Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 12-BSOP (0.295, 7.50mm Width) Exposed Pad package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 2 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the BTS5215 family.A total of 12 terminations can be found in it.It is important to note that the LED driving board has 2 functions.From the lighting driver, there is a maximum output of 3.7AV.It is possible to obtain high efficiency with a supply voltage of 12V.This LED driver is equipped with a total of 12 pins.The maximum supply voltage for this lighting driver is set to 40V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 5.5V.
BTS5215LAUMA1 Features
Supplied from 12V
BTS5215LAUMA1 Applications
There are a lot of Infineon Technologies
BTS5215LAUMA1 Power Switches ICs applications.
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards
- HDD, SSD