DS25BR120TSDX/NOPB Overview
Transport is made easy with power buffer packaging in 8-WFDFN Exposed Pad.In a package of Tape & Reel (TR) it is ready for power buffer.An easy-to-adjust universal mout.Typical Buffer, ReDriver type.The op amp buffer uses 3V~3.6V voltage to operate.There is CML, LVDS, LVPECL input facilitation.A -40°C~85°C should be set as the operating temperature in order to avoid malfunctions.In addition to LVDS, this operational amplifier buffer targets other applications.You can get more pin-to-pin solutions for your specific needs by searching with "DS25BR120".8 terminals are located on the op amp buffer.During reflow, it reaches a temperature of 260.The splitter is able to perform many demanding tasks when provided with 3.3V voltage.Pinouts start at 8 pins on the power buffer.There are 8 pins on the op amp buffers.A Surface Mount hole allows it to be mounted on a PCB or other board.106mA is the voltage at which this power buffer operates.In order to operate normally, you need a voltage of 3.3V.The splitter dissipates at most 2.08W watts.The repeater signal is a 1 element interface.
DS25BR120TSDX/NOPB Features
Mainly used in LVDS.
DS25BR120TSDX/NOPB Applications
There are a lot of Texas Instruments
DS25BR120TSDX/NOPB Signal Buffers, Repeaters, Splitters applications.
- Cellular Phone Base Stations
- Add/Drop Muxes
- Digital Crossconnects
- Network Switches/Routers
- Backplane Interconnect
- Clock Distribution
- Protection Switching
- Loopback
- Clock Distribution
- Servers
