DS25BR440TSQ/NOPB Overview
To make transportation easier, the power buffer is packaged in a 40-WFQFN Exposed Pad.Packaged in Tape & Reel (TR) and ready for power buffer.An easy-to-adapt universal mount.A Buffer, ReDriver is a typical type.For its operation, this op amp buffer uses a voltage of 3V~3.6V.This facilitates CML, LVDS, LVPECL input.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.Application-specific operational amplifier buffers such as this one are targeted at LVDS and other markets.For more pin-to-pin solutions, try "DS25BR440".On the op amp buffer, you will find 40 terminals.There is a peak reflow temperature of 260 for this power buffer.3.3V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.The 40 pins are on it.A Surface Mount hole is available for mounting it on a PCB or another board.In addition to the power buffer, other Line Driver or Receivers also play an important role.In order for this power buffer to operate, a voltage of 190mA must be applied.It is necessary to supply voltage 3.3V for normal operation.The receiver is 4-Bit-based.In the most extreme case, this splitter dissipates 2.44W watts.The splitter should operate at 190mA nominal supply current under normal circumstances.The spliter's current output is 4mA.The video signal spliter contains 4 drivers.
DS25BR440TSQ/NOPB Features
Mainly used in LVDS.
A standard Line Driver or Receivers.
4-Bit receiver.
DS25BR440TSQ/NOPB Applications
There are a lot of Texas Instruments
DS25BR440TSQ/NOPB Signal Buffers, Repeaters, Splitters applications.
- Digital Crossconnects
- Network Switches/Routers
- Backplane Interconnect
- Clock Distribution
- Protection Switching
- Loopback
- Clock Distribution
- Servers
- Industrial PCs
- Test Equipment