| Quantity | Price |
|
|---|
| Quantity | Price | Price Tax |
|---|
| 1 | 10 | 100 | 1000 | 2500 | Updated | ||||
|---|---|---|---|---|---|---|---|---|---|
| * | DS25MB200TSQ | 14076 | USD | ||||||
| * | DS25MB100TSQE/NOPB | 5856 | USD | ||||||
| * | DS25MB100TSQX/NOPB | 0 | USD | ||||||
| * | DS25MB100TSQX/NOPB | 12430 | USD | ||||||
| * | DS25MB200TSQ/NOPB | 0 | USD | ||||||
| * | DS25MB100TSQ/NOPB | 5 | USD | ||||||
| * | DS25MB100TSQE/NOPB | 0 | USD | ||||||
| * | DS25MB200TSQ | 0 | USD | ||||||
| * | DS25MB100TSQX/NOPB | 150 | USD | 6.7350 | 6.3983 | 6.0615 | 5.3880 | ||
| * | DS25MB100TSQ/NOPB | 3200 | USD | 7.1550 | 6.7973 | 6.4395 | 5.7240 | ||
| * | DS25MB200TSQ/NOPB | 912 | USD | 6.7500 | 6.4125 | 6.0750 | 5.4000 | ||
| * | DS25MB200-EVK | 3 | USD | 256.37000 | |||||
| * | DS25MB100-EVK | 0 | USD | ||||||
| * | DS25MB200TSQ/NOPB | 67 | USD | 7.773314 | 7.333315 | 6.918222 | |||
| * | DS25MB100TSQ/NOPB | 2 | USD | 10.060740 | 9.491264 | 8.954023 | |||
| * | DS25MB100TSQX/NOPB | 12150 | USD | 7.165747 | 6.760139 | 6.377489 | |||
| * | DS25MB100TSQE/NOPB | 0 | USD | ||||||
| * | DS25MB200TSQ | 1293 | USD | 1.849488 | 1.744800 | 1.646038 | |||
| * | DS25MB200-EVK | 3 | USD | 235.846000 | 222.496226 | 209.902100 | |||
| * | DS25MB200 | 0 | |||||||
| * | DS25MB200-EVK | 3 | USD | ||||||
| * | DS25MB200TSQ | 1430 | USD | ||||||
| * | DS25MB200TSQ/NOPB | 250 | USD | ||||||
| * | DS25MB100TSQ/NOPB | 2 | USD | ||||||
| * | DS25MB100TSQX/NOPB | 17559 | USD |
The DS25MB100 device is a signal conditioning 2:1 multiplexer and 1:2 fan-out buffer designed for use in backplane-redundancy or cable driving applications. Signal conditioning features include continuous time linear equalization (CTLE) and programmable output pre-emphasis that enable data communication in FR4 backplane up to 2.5 Gbps. Each input stage has a fixed equalizer to reduce ISI distortion from board traces.
All output drivers have four selectable levels of pre-emphasis to compensate for transmission losses from long FR4 backplane or cable attenuation reducing deterministic jitter. The pre-emphasis levels can be independently controlled for the line-side and switch-side drivers. The internal loopback paths from switch-side input to switch-side output enable at-speed system testing. All receiver inputs are internally terminated with 100-Ω differential terminating resistors. All driver outputs are internally terminated with 50-Ω terminating resistors to VCC.
