P-Channel Tape & Reel (TR) 1.2Ohm @ 2.4A, 10V ±20V 200pF @ 25V 8.7nC @ 10V 100V TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
A device's maximal input capacitance is 200pF @ 25V, which is defined as the capacitance between its input terminals with either input grounded.This device's continuous drain current (ID) is -4A, which represents the maximum continuous current it can conduct.In this device, the drain-source breakdown voltage is -100V and the drain-source breakdown voltage is the VDS at which a specified value of ID flows.Its turn-off delay time is 15 ns, which is the time to charge the device's input capacitance before drain current conduction begins.When a gate-to-source voltage (VGS) is applied to bias a MOSFET to the on state, the resistance between the drain and the source of the device is 1.2Ohm.Input capacitance charging takes time before drain current conduction begins, so the turn-on delay time is 10 ns.Gate-source voltage, or VGS, is the voltage across a FET transistor's gate-source terminal, and can be 20V volts.This transistor requires a 100V drain to source voltage (Vdss).This device reduces its overall power consumption by using drive voltage (10V).