P-Channel Tube 500mOhm @ 4A, 10V ±20V 270pF @ 25V 12nC @ 10V 60V TO-220-3
Input capacitance, CI, is defined as the capacitance between two input terminals of an op amp with one input grounded, and the input capacitance of this device is 270pF @ 25V.This device has a continuous drain current (ID) of [6.7A], which is its maximum continuous current.The turn-off delay time of a device is the time it takes to charge its input capacitance before drain current can flow. The turn-off delay time of a device is 10 ns.MOSFETs have 500mOhm resistance between the drain and the source when biased into the on state by a gate-to-source voltage (VGS).During turn-on, the input capacitance of the device is charged before drain current conduction starts, so its delay time is 11 ns.Gate-source voltage, or VGS, is the voltage across a FET transistor's gate-source terminal, and can be 20V volts.Electrical devices have threshold voltages at which their operations become active, and this transistor has a threshold voltage of -4V.In order to operate this transistor, a voltage of 60V is needed from the drain to the source (Vdss).Its overall power consumption can be reduced by using drive voltage (10V).