LM393PSRG4 Overview
A convenient transport package is provided in 8-SOIC (0.209, 5.30mm Width) .The comparator has a CMOS, MOS, Open-Drain, TTL output.The part will be shipped by Tape & Reel (TR) .There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as Differential .In total, it contains 2 elements.As a result, it contains 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator is equipped with 8 pins.Search LM393 to find more pin-to-pin solutions.There is a quiescent current of 2.5mA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 1mA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1mA .In order to run the device, there are only 5V power supplies required.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LM393PSRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393PSRG4 Applications
There are a lot of Texas Instruments
LM393PSRG4 linear comparators applications.
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics