LM4854MT/NOPB Overview
There is a device embedded in 14-TSSOP (0.173, 4.40mm Width) .Amp parts is recommended that the chip be packaged in a Tube case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 14 termination.1-Channel (Mono) with Stereo Headphones is the output configured for it.The device is of type Class AB .Electronic parts are mounted in the way of Surface Mount .Amp parts is powered by a voltage of 2.4V~5.5V volts.2 channels are present on the device.Operation can be ensured by Depop, Shutdown, Standby, Thermal Protection .A temperature greater than -40°C~85°C TA should not be used.There are 14 pins present on this device.This is a member of the LM4854 family.To ensure normal operation, the supply voltage (Vsup) must be maintained above 2.4V .The maximum supply voltage (Vsup) is reached at 5.5V .The device is powered by a voltage of 3/5V volts.This is a member of the Boomer® series.A maximum supply current of 15mA is achieved.
LM4854MT/NOPB Features
14-TSSOP (0.173, 4.40mm Width) package
14 pin count
LM4854 family
Boomer® series
LM4854MT/NOPB Applications
There are a lot of Texas Instruments
LM4854MT/NOPB audio amplifiers applications.
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video and image computer boards
- Medical instruments
- Television broadcasting equipment