20 kHz kHz 1W W Audio Amplifiers 3mm mm 5.5V V 8 pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
There is a device embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 8 termination.1-Channel (Mono) is the output configured for it.The device is of type Class AB .The 8 pins are pronged contacts which are part of a signal interface in a computer or other communication device.Electronic parts are mounted in the way of Surface Mount .Amp parts is powered by a voltage of 2.2V~5.5V volts.1 channels are present on the device.Operation can be ensured by Depop, Shutdown, Thermal Protection .A temperature greater than -40°C~85°C TA should not be used.There are 8 pins present on this device.This is a member of the LM4891 family.The electronic part is mounted in the way of Surface Mount .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 1W kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 2.2V .The maximum supply voltage (Vsup) is reached at 5.5V .The device is powered by a voltage of 2.2/5.5V volts.This is a member of the Boomer® series.A maximum supply current of 10mA is achieved.