5.5V DC DC Voltage Regulator SWITCHING REGULATOR 1 Output Outputs 500kHz Tube 3A (Switch) TSSOP-16
For optimal performance, this voltage regulator uses the Tube package. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. Space savings are achieved by placing this voltage regulator in the TSSOP-16 package. There are 1 Output outputs on DC DC switching regulator. Adjusting voltage regulator's output pins generate Adjustable output. There is a switching regulator that is compatible with the Surface Mount mounting. As long as its operating temperature is 0°C ~ 125°C (TJ), dc to dc voltage regulator should perform well. There is a switching frequency of 500kHz for this voltage regulator 12v. Input voltage 5.5V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. The output voltage (Min/Fixed) of this voltage regulator 12v is 1.219V. This voltage regulator 12v offers maximum design flexibility with an output current of 3A (Switch). The maximum input voltage of this voltage regulator 12v is 60V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 15 V for the purposes of operation. Listed under the subcategory of PMIC - Power Management ICs is this voltage regulator 12v. There is a possibility that DC DC switching regulator can give voltage at Adjustable volts. On the basis of the maximum output voltage of 55.2V, adjusting voltage regulator can be operated easily. Using the maximum switching frequency of 570 kHz, this harley voltage regulator operates at its maximum efficiency. This 12 volt voltage regulator can output 6.5 A A at its top. The switching DC-DC regulator belongs to the LT3431 family of electronic voltage regulator 12vs. There is no external influence on harley voltage regulator as it consumes 30 uA A of quiescent current. Switching regulator with 16 pins for DC-DC power. The DC-DC switching regulator runs on a 2.5 mA supply current. Using 500 kHz as the adjusting voltage regulator's switching frequency can improve reliability. 2.75 A is normally the output current ofDC DC switching regulator.