2.6V DC DC Voltage Regulator SWITCHING REGULATOR 3 Outputs 250kHz ~ 2.2MHz Rail/Tube 1.5A, 1.8A, 2.5A QFN-40

A Rail/Tube package is used in this voltage regulator to optimize performance. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. In order to save space, this voltage regulator is packaged in the QFN-40 package. 3 outputs of voltage regulator are configured. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. Keeping dc to dc voltage regulator's operating temperature at -40°C ~ 125°C (TJ) is essential when operating. A DC-DC switching regulator such as this one switches at 250kHz ~ 2.2MHz. Voltage regulators like this one can operate at least with 2.6V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.8V, 1V. This voltage regulator 12v features maximum design flexibility thanks to its 1.5A, 1.8A, 2.5A output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 42V. Due to its NOT SPECIFIED high peak reflow temperature, this voltage regulator 12v is virtually indestructible. An input voltage of 12 V is required to meet the requirements of the switching regulator operation. A voltage regulator 12v such as this falls under the PMIC - Power Management ICs category and belongs to this category. The voltage DC DC switching regulator can provide is up to 1(V) volts. The maximal output voltage of 42V allows adjusting voltage regulator for simple operation. In order for this harley voltage regulator to function properly, it has a maximum switching frequency of 2200 kHz. At its peak, this voltage regulator can output 4.5 A A. Known as a switching DC-DC regulator, this electronic voltage regulator 12v is part of the LT8601 family. There are no external factors that affect DC DC switching regulator's consumption of 70 uA A of quiescent current. Switching regulators with a dc to dc voltage regulator's minimum input voltage of 3/2.6(V) are permitted. There are 40 pins on this voltage regulator. Powered by a 0.03 mA supply current, this DC-DC switching regulator works as a converter between DC and DC. Using 250 kHz to 2.2 MHz as an adjusting voltage regulator's switching frequency could result in improved reliability. 2.5/1.5/1.8(A) amps is the standard output current of DC DC switching regulator.