1.92V DC DC Voltage Regulator 1 Output Outputs 1.2MHz Reel 200mA MSOP-16
For optimal performance, this voltage regulator uses the Reel package. Space savings are achieved by placing this voltage regulator in the MSOP-16 package. There are 1 Output outputs on DC DC switching regulator. Adjusting voltage regulator's output pins generate Programmable output. There is a switching regulator that is compatible with the Surface Mount mounting. As long as its operating temperature is -40°C ~ 125°C (TJ), dc to dc voltage regulator should perform well. There is a switching frequency of 1.2MHz for this voltage regulator 12v. Input voltage 1.92V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. The output voltage (Min/Fixed) of this voltage regulator 12v is 2.5V. This voltage regulator 12v offers maximum design flexibility with an output current of 200mA. The maximum input voltage of this voltage regulator 12v is 15V. Listed under the subcategory of PMIC - Power Management ICs is this voltage regulator 12v. There is a possibility that DC DC switching regulator can give voltage at 2.5 V to 15 V volts. On the basis of the maximum output voltage of 15V, adjusting voltage regulator can be operated easily. The switching DC-DC regulator belongs to the LTC3129-1 family of electronic voltage regulator 12vs. There is no external influence on harley voltage regulator as it consumes 1.3 uA A of quiescent current. The DC-DC switching regulator runs on a 0.0013 mA supply current. Using 1.2 MHz as the adjusting voltage regulator's switching frequency can improve reliability. 200 mA is normally the output current ofDC DC switching regulator.