8 Terminals 2.5V 8-Pin LTC3547 DC DC Voltage Regulator DUAL SWITCHING CONTROLLER 2 Outputs 2.25MHz Tape & Reel (TR) 300mA 8-WFDFN Exposed Pad

It is designed to provide optimal performance by utilizing the Tape & Reel (TR) package. There are 8 terminations in this harley voltage regulator. As this regulator voltage is equipped with an analog IC of the type DUAL SWITCHING CONTROLLER, it is a DUAL SWITCHING CONTROLLER-type voltage regulator. For space-saving purposes, this voltage regulator is available in the 8-WFDFN Exposed Pad package. A total of 2 outputs are configured in this voltage regulator. On the output pins of this DC DC switching regulator, there is a Fixed output generated. Surface Mount-mount switching regulator. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. Voltage regulator's switching frequency reaches 2.25MHz. The voltage regulator can be operated with a voltage as low as 2.5V as an input voltage. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 1.2V 1.8V. DC DC switching regulator's 300mA output current allows for maximum design flexibility. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. In this case, the DC/DC regulator belongs to the family LTC3547. Voltage can be produced at 5.5V volts by voltage regulator. The switching regulator operation of the system is controlled by 8 pins. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 1.8V. It is a voltage regulator with 1 channels.