8 Terminals 2.7V 8-Pin LTC3621 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 1MHz Tube 1A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

It uses the Tube package in order to optimize the performance of this voltage regulator. During the development of this harley voltage regulator, 8 terminations were made. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The harley voltage regulator is available as a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package to save space. The voltage regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. DC-DC switching regulators reach 1MHz switching frequencies. Despite its low input voltage, this voltage regulator can operate. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 0.6V. Featuring a 1A output current, dc to dc voltage regulator offers maximum design flexibility. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. For operation, voltage regulator provides a nominal input voltage of 12V. There is a DC/DC regulator in this family that belongs to the LTC3621 family. At 17V volts, voltage regulator can provide voltage. To operate the voltage regulator 12v, 8 pins are required. The output voltage of this voltage regulator 12v should at least be set at 600mV volts at all times. A maximum voltage of 17V can be obtained from the regulator voltage.