20 Terminals 4V~60V 20-Pin LTC3891 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 105kHz~835kHz 350kHz~535kHz Transistor Driver

In the 20-WFQFN Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4V~60V volts and has 4V~60V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at 105kHz~835kHz 350kHz~535kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. QUAD are the position of the terminal of the switching converters. Various 20 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. In addition to "LTC3891", there are other relevant dc to dc converter ics you can find. There are 20 pins on switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 4V. DC regulator outputs 24V voltage based on test statistics. The dc to dc regulator can only accept 60V input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 5A. DC regulator835kHz has the maximum frequency. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.80V TO 24V is used to better suit the DC to DC voltage regulator's situation.