20 Terminals 4.5V~16V 20-Pin LV5050 DC to DC converter IC 1 Outputs 250kHz~1.1MHz Transistor Driver

With its 20-LSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~16V and has a 4.5V~16V supply voltage. Worked in a -20°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 250kHz~1.1MHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Power Good, Soft Start. Switching converters are designed with the terminal (s) at position DUAL . The 20 terminations can be used for a wide range of dc switching. Searching "LV5050" will return other relevant dc to dc converter ics. 20 pins are on switching converter. If you are starting a new project, you should note the dc dc regulator's typical output current is 1mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 90 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 1.1MHz on this dc regulators. When running the voltage regulator dc to dc in a circuit, users should apply 16V to ensure safety and reliability. In order to ensure the dc switcher's functionality, users must limit the voltage to 16V due to the dc switcher's maximum input voltage. In order to use a 4.5V voltage supply, switching controller is necessary to have one.