DUAL Buffer, Non-Inverting 2V~6V 3-State Buffers 74AC Series 74AC125 14 Pins 1 Bit per Element 24mA 24mA 14-TSSOP (0.173, 4.40mm Width)
It utilizes a neat 14-TSSOP (0.173, 4.40mm Width) package. A logical driver like this one is packaged using an external packaging called Tape & Reel (TR). You can find this bus transceiver in the Surface Mount mounting format. Typical Buffer, Non-Inverting logic integrated circuits with a broad application range. An operating voltage of 2V~6V is applied to the ethernet transceiver, and it is powered by that voltage. A voltage buffer of this type operates at -40°C~85°C TA ambient temperature. There are 24mA 24mA logic state output currents of it in the high and low logic states. The outputs can be grouped into 3-State. 74AC series transceivers are part of this device. 14 terminations are provided by this buffer. Supply voltage must be 5V. There is a AC family part that is attached to this electronic component. With the electrical component, there are 14 pins. In total, it can be used for Surface Mount different purposes. The cable has 14 pins. Transceiver with 2 ports. Each element utilizes 1 bits. Other related electrical parts can also be found on 74AC125. Electronic part 8μA is used in a quiescent stateA TAPE AND REEL package is usually sold with it. For safe and stable operation, users should apply 5V supply voltage to the electrical component. Depending on the transceiver, a voltage of 2V is required to supply the device with electricity. Ethernet transceivers like this one provide high-quality communication over 4 channels. It is capable of producing 3 signal lines at a time. Buffer ICs are controlled by ENABLE LOW control technology during startup.