2V~6V 155MHz 8 Bit D-Type Flip Flop DUAL 74AC374 20 Pins 8μA 74AC Series 20-SOIC (0.295, 7.50mm Width)

In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. A supply voltage of 2V~6V is required for operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. The FPGA belongs to the 74AC series. A frequency of 155MHzshould be the maximum output frequency. A total of 1elements are contained within it. As a result, it consumes 8μA quiescent current and is not affected by external forces. The number of terminations is 20. It is a member of the 74AC374 family. An input voltage of 5Vpowers the D latch. There is 4.5pF input capacitance for this T flip flop. In this case, the D flip flop belongs to the ACfamily. There is an electronic component mounted in the way of Surface Mount. 20pins are included in its design. This device's clock edge trigger type is Positive Edge. It is designed with a number of bits of 8. In this case, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. Using 8 circuits, it is highly flexible. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The flip flop has 2embedded ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The JK flip flop is with 3 output lines to operate.