16 Terminations 2V~6V 16 Pin 74HC151 Signal switch 74HC Series 1 Functions
Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.The mounting method digital switch ic uses is Surface Mount.A digital IC Data Selector/Multiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.Using a 2V~6V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74HC series are suitable for a wide range of applications.There are 16 terminations included in its basic configuration.The base part number is 74HC151, which is also useful when looking up signal switch's related components.In this case, 4.5V is the voltage supplied to the multiplexer's system.Signal switch has 16 component pins.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.This multiplexer ic has 16 pins configured.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the HC/UH family.Vsup should be kept at 2V to prevent some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.The switches package is packaged in a way which is consistent with TAPE AND REEL.In order to accept voltage levels, the multiplexers have input lines 8 on the board.In this case, the signal source has a total of 2 output lines.