2V~6V 35MHz 1 Bit D-Type Flip Flop DUAL 74HC175 16 Pins 4μA 74HC Series 16-SOIC (0.154, 3.90mm Width)
16-SOIC (0.154, 3.90mm Width)is the packaging method. The Tubepackage contains it. T flip flop is configured with an output of Differential. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. In the operating environment, the temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74HC series. This D flip flop should not have a frequency greater than 35MHz. A total of 1elements are present in it. There is 4μA quiescent consumption. A total of 16terminations have been recorded. The 74HC175 family contains it. A voltage of 5V provides power to the D latch. This T flip flop has a capacitance of 10pF farads at the input. It belongs to the family of electronic devices known as HC/UH. There is an electronic part that is mounted in the way of Surface Mount. The 16pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. It is designed with 1bits. As soon as Vsup reaches 6V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be kept above 2V. Considering its reliability, this T flip flop is well suited for RAIL. A total of 2/6V power supplies are needed to run it. This T flip flop features a maximum design flexibility due to its output current of 5.2mA. In order for the chip to function, it has 4output lines. Currently, there are 4 channels available.