DUAL Transceiver, Non-Inverting 2V~6V 3-State Buffers 74HC Series 74HC245 20 Pins 7.8mA 7.8mA 20-TSSOP (0.173, 4.40mm Width)
It utilizes a neat 20-TSSOP (0.173, 4.40mm Width) package. A logical driver like this one is packaged using an external packaging called Tape & Reel (TR). You can find this bus transceiver in the Surface Mount mounting format. Typical Transceiver, Non-Inverting logic integrated circuits with a broad application range. An operating voltage of 2V~6V is applied to the ethernet transceiver, and it is powered by that voltage. A voltage buffer of this type operates at -55°C~125°C TA ambient temperature. There are 7.8mA 7.8mA logic state output currents of it in the high and low logic states. The outputs can be grouped into 3-State. It uses all 1 elements. 74HC series transceivers are part of this device. 20 terminations are provided by this buffer. Supply voltage must be 3V. There is a HC/UH family part that is attached to this electronic component. With the electrical component, there are 20 pins. In total, it can be used for Surface Mount different purposes. The cable has 20 pins. Transceiver with 2 ports. Other related electrical parts can also be found on 74HC245. Power supplies with 2/6V should be used. A TAPE AND REEL package is usually sold with it. Depending on the transceiver, a voltage of 2V is required to supply the device with electricity. This electronic component consists of 8 efficient bits that are included within it. Ethernet transceivers like this one provide high-quality communication over 8 channels. Buffer ICs are controlled by COMMON CONTROL control technology during startup.