Tape & Reel (TR) 16 ROHS3 Compliant Active Multivibrators Multivibrator Surface Mount 16-TSSOP (0.173, 4.40mm Width) 5V V 130μA μA 130μA μA

There is a 16-TSSOP (0.173, 4.40mm Width) case in which it is packaged.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended to mount Multivibrator in a Surface Mount-posMultivibratorion.A part's logic type includes Monostable as part of its logic.Multivibrator is provided in a quantMultivibratory of 2V~6V.There is an electrical component included in the 74HC series.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.The output of 5.2mA 5.2mA is low in terms of current while it is high in terms of voltage.This component has been designed based on the 74HC4538 family of components.There are a total of 16 terminations on it.Multivibrator is capable of handling voltages up to 4.5V.There is a 2 input for data or a clock input on this board.16 pins are located on the part in total.HC/UH family is the family that it belongs to.Multivibrator is possible to mount 16 pins on this part if you wish.There is a Surface Mount which mounts the device.The minimum supply voltage must be greater than 3V if the supply voltage is to exceed 3V.In the state of quiescence, it consumes a lot of current at 130μA.Integrated circuit is specified that the operating supply voltage for the chip is 5V volts.As a result, this chip needs a voltage supply of 6V volts for it to work properly.Integrated circuit has a maximum supply current of 130μA and can handle a maximum supply current of X.