SP4T 400Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74HC4852A 16 Pins 100nA 3V 16-SOIC (0.154, 3.90mm Width)

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 4:1. Operational temperature extended around -55°C~125°C TA. 16 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. Multiplexers built on a SP4T switching circuit are built. It consists of 2 circuits. Try searching for the analog switch ic with MC74HC4852A if you are looking for variants. As far as internal resistance is concerned, it has 1.7kOhm. To find out what the functions of 16 pins are, please refer to their datasheets. Users shouldn't supply more than 6V voltage to the switch device. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 2V. This digital switch can be operated with a current of 20μA. This analogue multiplexer requires a voltage of 2V~6V when it drains from a single voltage supply. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. The 8 inputs need to be operated in order to work.