DUAL Buffer, Non-Inverting 2V~3.6V 3-State Buffers 74LCX Series 74LCX16244 48 Pins 24mA 24mA 48-TFSOP (0.240, 6.10mm Width)

An interesting 48-TFSOP (0.240, 6.10mm Width) package is used. As part of the external packaging, this logical driver uses the Tube form factor. In this bus transceiver, you can choose from a Surface Mount mount or a D mount. There is a wide range of applications for this Buffer, Non-Inverting logic integrated circuit. The supply voltage for this ethernet transceiver is 2V~3.6V. As long as the ambient temperature does not exceed -40°C~85°C TA, the logical driver can function. In both high and low logic states, it has an output current of 24mA 24mA. With 3-State outputs, bus transceiver can be used. The 4 elements all play a role. A 74LCX series network transceiver, it belongs to the line of mobile devices. Logic device with 48 different terminations. There is a requirement for 2.5V of supply voltage. This electronic part belongs to the LVC/LCX/Z family of parts. This electric component comes with 48 pins. Surface Mount applications can be used with digital buffer. A 48-pin connector is used. An enhanced bus transceiver with 2 ports is available. Search 74LCX16244 for other related electrical components. It uses 20μA when quiescent. There is usually a RAIL package available. If the transceiver is to be supplied with power, then it must be supplied with a minimum voltage of 2V. The electronic part comes with 4 efficient bits which are included within the package. As a result, 3 signal lines are capable of being output through this voltage buffer. 16 inputs are present in it. Based on 1 circuits, digital buffer operates fundamentally. Does the electronic component support schmitt trigger input? The answer is No. Voltage buffers using ENABLE LOW control start up automatically.