DUAL Buffer, Non-Inverting 2V~5.5V 3-State Buffers 74VHC Series 74VHC126 14 Pins 1 Bit per Element 8mA 8mA 14-TSSOP (0.173, 4.40mm Width)
This package uses 14-TSSOP (0.173, 4.40mm Width). A logical driver using the Tape & Reel (TR) external packaging is used in this application. Buffers like this are available in the Surface Mount-mount form factor. Buffer, Non-Inverting logic integrated circuits see a wide range of applications, as shown here. There is a supply voltage of 2V~5.5V applied to this ethernet transceiver in order to power it. In ambient temperatures up to -55°C~125°C TA, this voltage buffer is designed to operate. There is a 8mA 8mA output current for the high and low logic states. A total of 3-State outputs can be dealt with by transceiver. A transceiver of the 74VHC series, it belongs to the 74VHC series. Thebuffer features 14 terminations that serve different purposes. 3.3V is the required supply voltageThis buffer driver is part of the AHC/VHC family of parts. With the electrical component, 14 pins are set. This logical driver is suitable for Surface Mount different applications. In total, it has 14 pins. The transceiver features 2 ports for enhanced functionality. Each element uses 1 bits. In addition to these electrical components, you can also search for them on 74VHC126. During quiescent state, the electronic part uses 4μA. The recommended power supply is 2/5.5V. TAPE AND REEL packages are usually sold. For the transceiver to be powered, it must have a minimum voltage of 2V. There are 4 high-quality communication channels on this ethernet transceiver. In addition to this, it can output 3 signals as well. This electronic component produces a typical output current of 8mA. Buffer ICs are controlled by ENABLE HIGH control technology during startup.