16 Terminations 2V~5.5V 16 Pin 74VHC138 Signal switch 74VHC Series 1 Functions

Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.The operating temperature of -55°C~125°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~5.5V supply voltage.In addition to being a member of the 74VHC series, these multiplexers have a wide range of applications.It is designed with 16 terminations as part of its basic configuration.As its base part number is 74VHC138, logic switch can also be used to find its related parts.For multiplexer's system, a voltage of 3.3V is supplied.This turn signal switch consists of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.A configuration of 16 pins is used.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the AHC/VHC family.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.During mux switch's normal operation, 2/5.5V is provided with a power supply.Without external influences, it consumes 4μA current of multiplexer ic.The switches package is packaged in accordance with the TR method.It is possible to accept voltage levels by using one of the 3 input lines of multiplexers.A signal source has 8 output lines.