4.6V 3 Terminals 3-Pin MCP100 Voltage supervisor -- Series 1 Channels Min 1V Max 5.5V

As you can see, this power management is mounted through 3 terminals. There is a Bulk-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes TO-226-3, TO-92-3 (TO-226AA) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be NOT APPLICABLE. When 4.6V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Through Hole. It has a total of 3 pins that are attached to IC management. This power management has 3 pins. Supply voltage (Vsup) should be at least 1V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Through Hole mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 60μA supply current present in the power management. It also contains ICs of other kinds, such as POWER SUPPLY SUPPORT CIRCUIT, which are included in the power management. A similar IC managements number of the manufacturer can always be found by using MCP100, the base power ics number. A power supply of 1/5.5 V watts is required for the operation of this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA. A PMIC from the well-known -- series of products is being offered here. voltage supervisor is comprised of 1 elements and has been extensively used across a wide array of target applications. There are 3 terminals on the voltage supervisor.