4.6V 3 Terminals 3-Pin MCP101 Voltage supervisor -- Series 1 Channels Min 1V Max 5.5V

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Bulk-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of TO-226-3, TO-92-3 (TO-226AA) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at NOT APPLICABLE. When a supply voltage of 4.6V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Through Hole mounts power management on the wall. A total of 3 pins are located on this power management. 3 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Through Hole mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 60μA volt supply current. There are other types of IC included in the power managment ic, such as types POWER SUPPLY SUPPORT CIRCUIT. To find similar IC managements from the manufacturer, you can always search by MCP101. The voltage supervisor requires a power source of 1/5.5 V volts in order to work correctly. The maximum supply temperature voltage supervisor can handle is 60μA. As you can see, this IC power comes from the well-known -- series of products. Featuring 1 elements, this power managment ic has been extensively used in all types of applications. The power management has 3 terminals.