P-Channel 0.65 mm PMIC -- Series MIC2003 6 Pin 6-VDFN Exposed Pad, 6-MLF®
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 6-VDFN Exposed Pad, 6-MLF®.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It comes under the family of MIC2003.The operation is performed through the 6 pins.Currently, the lighting driver has a total of 1 functions.There is a maximum output of 800mAV from the LED driver.This operation requires the maximum output current to be decreased to 800mA.Surface Mount is mounted in the way.6 pins are connected to it in total.Currently, the LED driving board has 100MOhm resistance.It is part of the -- series.As a result, the output current is set to 2.1 A.A self-contained econtainer holding Switch ICs capacity contains this lighting driver.In this LED driver, the maximum supply voltage is configured to be 5.5 V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 2.5 V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.It is recommended to set the supply voltage to 2.5 V to 5.5 V for optimum efficiency.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.It has a maximum supply current of 0.3 mA.A classification of High Side Current Limit is assigned to this electrical component.