P-Channel 0.65 mm PMIC -- Series MIC2004 6 Pin 6-VDFN Exposed Pad, 6-MLF®
The package is in the form of a Tape & Reel (TR).It is included in the package 6-VDFN Exposed Pad, 6-MLF®.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.Currently, the LED driving board is equipped with Load Discharge features.It is part of the MIC2004 family of LED drivers.It is necessary to use the 6 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.800mAV is the maximum output of the LED driver.This results in the maximum output current dropping to 800mA to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.Lighting drivers with 100MOhm resistance are used.A component of this type is included in the -- series.A container with a capacity of Switch ICs contains this self-contained lighting driver.This LED driver is configured to have a maximum supply voltage of 5.5 V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 2.5 V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.When using this LED driving board, it is recommended that the supply voltage is set to 2.5 V to 5.5 V.Stable operation is possible with a maximum operating temperature of 85°C°C.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.Electrical components classified as High Side Current Limit belong to this category.