P-Channel 0.65 mm PMIC -- Series MIC2006 6 Pin 6-VDFN Exposed Pad, 6-MLF®
As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 6-VDFN Exposed Pad, 6-MLF®.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of P-Channel volts has been specified.As far as features are concerned, the LED driving board has Slew Rate Controlled.I believe it belongs to the MIC2006 family.In order to operate, 6 pins are used.It contains 1 functions.This lighting driver is capable of delivering a maximum output of 800mA volts.It is necessary to reduce the maximum output current to 800mA to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.It has 100MOhm resistance.These electrical components are part of the -- series.The maximum supply voltage for this LED driver is 5.5 V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 2.5 V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.A maximum operating temperature of 85°C°C is required to provide stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.A maximum supply voltage of 5.5VV can be handled by the LED driving board.