P-Channel 0.95 mm PMIC -- Series MIC2009A 6 Pin SOT-23-6
As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package SOT-23-6.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of P-Channel volts has been specified.I believe it belongs to the MIC2009A family.In order to operate, 6 pins are used.It contains 1 functions.This lighting driver is capable of delivering a maximum output of 900mA volts.It is necessary to reduce the maximum output current to 900mA to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 6 pins.It has 170mOhm resistance.These electrical components are part of the -- series.When this is the case, the output current is set to 2 A.Self-contained in an econtainer with a capacity of Switch ICs, this LED driver is self-contained.The maximum supply voltage for this LED driver is 5.5 V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 2.5 V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.Optimal efficiency requires a voltage of 2.5 V to 5.5 V.The maximum input voltage is 5.5V volts.A minimum input voltage of 2.5V volts is required for this LED driver.A maximum operating temperature of 85°C°C is required to provide stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.Currently, there are 1 inputs available.Electrical components classified as High Side Switch/USB Power Distribution Switch are included in this category.