N-Channel 0.65 mm PMIC MM8™ Series MIC2025 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
It is packaged in the manner of a Tape & Reel (TR).There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.There are 1 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Slew Rate Controlled, Status Flag features.The MIC2025 family consists of this type.In order to operate, the 8 pins are used.It consists of 1 functions.In terms of output, the lighting driver can provide a maximum of 500mA V.In order to meet the operation criteria, the maximum output current drops to 500mA.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 140MOhm resistance.There is an electrical component included in the MM8™ series.In this case, the output current will be set to 500 mA.It is self-contained in an econtainer with a capacity of Switch ICs.The LED driver is configured with a maximum supply voltage of 5.5 V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7 V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.In total, there are 1 channels available.It is recommended that the supply voltage be set at 2.7 V to 5.5 V in order to achieve maximum efficiency.For stable operation, the maximum operating temperature should be 85°C°C.The unit is designed to operate at a minimum working temperature of -40°C degrees Celsius to ensure reliability.As a result of using this lighting driver, Undervoltage Lockout threshold is 2.3 for vin falling can also be produced.In terms of supply voltage, it is capable of handling a maximum of 5.5V volts.In order to operate, it requires at most 0.16 mA amps of supply current.In the case of this electrical component, it is classified as High Side.