MIC2033-08AYM6-T5 Overview
It is packaged in the form of a Cut Tape (CT).It is included with the SOT-23-6 package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.As you can see, it comes from the MIC2033 family.From the lighting driver, there is a maximum output of 800mAV.To comply with the operation criteria, the maximum output current is reduced to 800mA.In this case, there is 177mOhm resistance in the LED driving board.It is designed to be stable at 125°C°C, which is the maximum operating temperature.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.It can handle a maximum voltage of 5.5VV.It can also be used at 2.5Vvolts if needed.
MIC2033-08AYM6-T5 Features
Resistance of 177mOhm
MIC2033-08AYM6-T5 Applications
There are a lot of Microchip Technology
MIC2033-08AYM6-T5 Power Switches ICs applications.
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards
- HDD, SSD