N-Channel 1.27 mm PMIC -- Series MIC2077 16 Pin 16-SOIC (0.295, 7.50mm Width)
The package is in the form of a Tube.It is included in the package 16-SOIC (0.295, 7.50mm Width).The lighting driver is mounted in the Surface Mount position.USB Switch is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has a total of 4 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.It is part of the MIC2077 family of LED drivers.It is necessary to use the 16 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.500mAV is the maximum output of the LED driver.This results in the maximum output current dropping to 500mA to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.A component of this type is included in the -- series.A container with a capacity of Switch ICs contains this self-contained lighting driver.This LED driver is configured to have a maximum supply voltage of 5.5 V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 2.7 V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.You can select from 4 channels.When using this LED driving board, it is recommended that the supply voltage is set to 2.7 V to 5.5 V.Stable operation is possible with a maximum operating temperature of 85°C°C.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.It can handle a voltage of 5.5VV as its maximum supply voltage.Electrical components classified as USB High Side Current Limit belong to this category.