8V~40V 16-Pin MIC2131 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 150kHz Transistor Driver
With its 16-VQFN Exposed Pad, 16-MLF® package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 8V~40V and has a 8V~40V supply voltage. Worked in a -40°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 150kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Power Good, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position QUAD . A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 24 V is input. Searching "MIC2131" will return other relevant dc to dc converter ics. 16 pins are on switching converter. There is a particular type of PMIC - Power Management ICs in switching converter. If you are starting a new project, you should note the dc dc regulator's typical output current is 15A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 92 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 170kHz on this dc regulators. This value is ALSO HAS ADJUSTABLE OUTPUT VOLTAGES DOWN TO 0.7V so that DC to DC voltage regulator better serves the purpose. Temperatures should be kept at -40°C or higher. There should be 125°C more than 125°C degrees Celsius in the machine. -- series dc to dc voltage regulator belong to this series. Total number of functions (s) for thare switch converters are 1. There is 16-MLF® (4x4) dc dc controller package associated with this part. Phases of this controller are 1. 170 kHz is the switching controller's maximum switching frequency. Maximum supply voltage is 40V.