Enable, Power On Reset Fixed 0.5 mm MIC2214 PMIC -- Series 10 10-VFDFN Exposed Pad, 10-MLF®
Tape & Reel (TR) cases are used for delivery. The Liner regulator IC is packaged in 10-VFDFN Exposed Pad, 10-MLF® case. Fixed is the output type of the Voltage Regulator IC. As part of this electrical component, 2 regulators are implemented. Variations are made to the Surface Mount operating temperature range by the Voltage Regulator IC. Default settings are set to -40°C~125°C degrees. There is a Positive configured as the output function for this IC regulator. There is a current output of 150mA, 300mA from this regulator IC. There are a total of 10 pins on this board. There are 2 outputs total on this voltage regulator IC in order to ensure that prompt and sufficient performance is achieved. There is a dropout voltage of 10 volts on this IC regulator. Chips have 10 pins. For your information, the basic part number for this regulator IC is MIC2214. In this case, we have a typical PMIC - Power Management ICs component. There is one type of regulator for this device, which is FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR. This IC regulator is a part of the -- Series of devices. You should use the regulator IC when the temperature is below 125°C. It is not possible to operate the chip below -40°C operating temperature.