MIC2293-15YML-TR Overview

As a result of its 8-VFDFN Exposed Pad, 8-MLF® package, it helps to save board space on the board. It has 1 outputs for LED drivers.We are using Surface Mount as the mounting method.With high efficiency, it emerges as a DC DC Regulator.It is possible for the led driver ic to function normally at -40°C~125°C TJ.It is clear that Backlight will benefit from the program.Using the frequency of 2MHz, it operates.The base is configured with 8 pins.If the voltage supply is lower than 2.5V, undetermined failures may occur.There are 3 segments in it.This is mounted by Surface Mount.You can find this LED driver under the base part number MIC2293.10V is an acceptable maximum value for the supply voltage.This model is designed to offer 10V as its maximum supply voltage.This device operates with a minimum input voltage of 2.5V volts.The system operates at a minimum supply voltage of 2.5V in order to achieve maximum efficiency.Currently, the supply current can only reach 10V.For stable operation, it is recommended that the operating temperature not exceed 125°C.500mA is the maximum current the load can handle.In order to maintain stable operation, a temperature greater than -40°C is essential.There is 15V output voltage on this device.It is recommended that the output voltage be no higher than 15V.A total of 1 channels are currently available for transmission.

MIC2293-15YML-TR Features

Available in the 8-VFDFN Exposed Pad, 8-MLF® package
Operating temperature of -40°C~125°C TJ
Frequency of 2MHz
Output voltage of 15V

MIC2293-15YML-TR Applications

There are a lot of Microchip Technology
MIC2293-15YML-TR LED Driver ICs applications.

• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices
• Stage Lighting and Signage