MIC2297-38YML-TR Overview
Using its 10-VFDFN Exposed Pad, 10-MLF® package, it is possible to save board space. LED drivers design with 1 outputs.This mounting method is Surface Mount.The system emerges as a DC DC Regulator with high efficiency.It is capable of working normally at -40°C~125°C TJ.A frequency of 600kHz is used to operate it.The operation of this system is supported by 10 terminations.This configuration is built upon 10 pins.It is possible that failures will occur if the voltage supply is below 2.5V.The mount is in the way of Surface Mount.The LED driver is available under the part number MIC2297.There is no maximum value acceptable for the supply voltage, so 10V is acceptable.A minimal supply voltage of 2.5V is required for it to achieve the highest efficiency.When the device is operated, 3.6V volts are applied to the circuit.It is not recommended that the output current exceeds 2.5A.
MIC2297-38YML-TR Features
Available in the 10-VFDFN Exposed Pad, 10-MLF® package
Operating temperature of -40°C~125°C TJ
Frequency of 600kHz
MIC2297-38YML-TR Applications
There are a lot of Microchip Technology
MIC2297-38YML-TR LED Driver ICs applications.
- Gallery lighting
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights