N-Channel 1.27 mm PMIC -- Series MIC2505 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)
As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 8-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.I believe it belongs to the MIC2505 family.As a result, there are 8 terminations.In order to operate, 8 pins are used.It contains 1 functions.This lighting driver is capable of delivering a maximum output of 2A volts.It is necessary to reduce the maximum output current to 2A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.In this case, it is mounted in the way of Surface Mount.It has 75MOhm resistance.These electrical components are part of the -- series.Self-contained in an econtainer with a capacity of Switch ICs, this LED driver is self-contained.The maximum supply voltage for this LED driver is 7.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.Optimal efficiency requires a voltage of 3 V to 7.5 V.A maximum operating temperature of 85 °C°C is required to provide stable operation.A minimum working temperature of -40 °C degrees Celsius is required to ensure its reliability.A maximum supply voltage of 7.5 VV can be handled by the LED driving board.Electrical components classified as High Side are included in this category.