MIC2563A-0BSM TR Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 28-SSOP (0.209, 5.30mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is PCMCIA Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 4 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the MIC2563A family.It is important to note that the LED driving board has 2 functions.From the lighting driver, there is a maximum output of 200mAV.This LED driver is equipped with a total of 28 pins.It is included in the -- series.The maximum supply voltage for this lighting driver is set to 6 V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3 V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.In order to operate at its maximum capacity, the supply current must not exceed 0.1 mA.
MIC2563A-0BSM TR Features
1 channels
MIC2563A-0BSM TR Applications
There are a lot of Microchip Technology
MIC2563A-0BSM TR Power Switches ICs applications.
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards
- HDD, SSD