MIC2566-0BTS Overview

It is packaged in the form of a Tube.It is included with the 14-TSSOP (0.173, 4.40mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is PCMCIA Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 2 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.A total of 14 terminations can be found in it.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 120mAV.It is possible to obtain high efficiency with a supply voltage of 3.3V.This LED driver is equipped with a total of 14 pins.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 2 channels are available for you to choose from.In addition, ALSO OPERATE FROM 3 TO 5.5V can be produced using this LED driving board.

MIC2566-0BTS Features

Supplied from 3.3V
2 channels
Additional features like ALSO OPERATE FROM 3 TO 5.5V

MIC2566-0BTS Applications

There are a lot of Rochester Electronics, LLC
MIC2566-0BTS Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD